Showing posts with label Hello Kitty. Show all posts
Showing posts with label Hello Kitty. Show all posts

Wednesday, November 7, 2012

Royal Icing Hello Kitty

Recently I piped a Monster High "Skullette" out of royal icing. I kept thinking how much it reminded me of a Hello Kitty head! Sure enough, the process is pretty similar. All you'll need is stiff consistency white royal icing, round tip #12, pre-made royal icing bows piped with a #57 tip, a flower nail, a Styrofoam block to rest the nail in, a glue stick, parchment paper squares, a dusting pouch filled with a 50/50 blend of cornstarch and powdered sugar, and food-safe markers like Gourmet Writers by AmeriColor. Start by sticking a parchment square to the flower nail with a dab from the glue stick. 
 Hold the #12 tip just above and at a right angle to the surface. Squeeze while piping an oval and filling in the center.
 Tap a fingertip thoroughly by touching it to the dusting pouch, then tap the surface flat.
 Add two short squirts of icing for ears. Tap them flat and taper them gently into points with your fingertips.
 Allow the icing to firm up for a while, then attach a bow with a dot of icing.
When the icing is completely firm, draw in the face with food-safe markers. These would be ideal as cupcake toppers! 

Thursday, February 23, 2012

Piping Bows with an Oval Tip

It's been a while since I picked up a piping bag; darn Wilton's new gum paste class! I was going to post another gum paste flower today, but decided to fool around with royal icing. I've been wanting to make some cute little bows to use in a cake border or on cupcakes, so here's what I came up with. I cut some parchment paper, then taped it to a cookie sheet:
I loaded a piping bag with royal icing. It took a while to find the right tip for what I had in mind; I fumbled around with various rose, ribbon, and star tips before settling on tip #57 by Ateco, which is an oval. I've mostly used it for writing cursive on cakes (a larger area sticks to the cake with an oval tip than with a round one). I started by piping a bunch of infinity signs, holding the tip at about a 45 degree angle to the surface.
Then I piped a couple of wavy tails:
It would be fine to stop there, but I wanted to try piping some sort of knot in the middle. Start at the base of the infinity symbol where the tails meet it, and pipe a short length up to the top:
Some of them had this unsightly peak…
…which can easily be tapped out with a finger, once you've touched it to a dusting pouch filled with a 50/50 mixture of powdered sugar and cornstarch:
I wanted to try another chunkier bow; something that might be appropriate for Hello Kitty (I recently found a Hello Kitty cookie cutter; an import, not licensed). I made a bunch of infinity signs that had rounder loops; a little more like an 8.
I piped the vertical line…
…and tapped it down into place. The bows can easily be removed from the parchment paper when they are dry after a few hours; peel the paper away from them like a sticker, and have a small spatula handy to pry them free if they're really stuck. Now that I know this idea for piping bows works, I'd better go snap up one of those cookie cutters before they get recalled!